PRODUCTS
Product Categories
Product Categories

Fast Mixing Agent PE-PP 45

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
Category
Return
1
Product description
Parameters
Parameter

Fast mixing agent PE-PP 45

Fast, high strength and safe operation

 

       WEICON fast-mix PE-PP 45 is a two-component structural adhesive based on methyl acrylate. Particularly suitable inert plastic (e.g. PE, PP and TPE) high-strength structural adhesive bonding. No pretreatment of the bonding surface is required.

Further, rapid mixture WEICON PE-PP 45 can be used as the plastic material of the "all-purpose adhesive", comprising the following plastics:

• Rigid PVC (polyvinyl chloride)

• PA (polyamide)

• PC (polycarbonate)

• ABS (acrylonitrile-butadiene-styrene)

• PMMA (polymethyl methacrylate)

• fiber composite materials (GRP, CRP, fiberglass, etc.) and it is more than other materials

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
WEICON Fast Mixing Agent PE-PP 45 (liquid environment)
ingredient Two-component glue gun (syringe)
Environment / Attribute Two-component glue gun (syringe)
form 38 ml
content 10: 1
Resin / curing agent mixing ratio (by volume) 2-3 minutes
Pot life (room temperature 20 ℃, 10 g material) 1,07
Mixing density (unit: g / cm3) 45.000 mPa • s
temperature Processing * 1 15-70 ℃
Solidify Colorless, transparent
Color before curing 0,2-0,3 mm
Bonding gap Best deal 1,0 mm
Solidify 2-3h (PP-PP)
Curing time (20 ℃) Machinable strength (35% strength) 6 h (Alu-Alu)
6 h (PP-PP)
Machinable strength (50% strength) 24 h (Alu-Alu)
24 h (PP-PP)
Final strength (100%) 72 h (Alu-Alu)
72 hours (Alu-Alu)
WEICON Fast Mixing Agent PE-PP 45 (fully cured)
Pure MMA average strength (DIN 53281-83) Shore hardness D 55
tension 13MPa`s
Tensile strength 5,3%
Color after curing Yellow, transparent
Average tensile shear strength (DIN 53283) ABS 10,5 N / mm²
GFK 17,0 N / mm²
GFK gel coating 10.1 N / mm² 5,7 N / mm²
PA 6.6 (30% glass fiber particles) 5,9 N / mm²
PC 7,4 N / mm²
PE HD (high concentration) 2,8 N / mm²
PE LD (low concentration) 5,2 N / mm²
PE UHMW (Ultra Polymer) 6,6 N / mm²
PMMA 7,6 N / mm²
PP 5,3 N / mm²
PS 14,1 N / mm²
PVC -
PTFE -N / mm²
aluminum 15,7 N / mm²
glass 4,5 N / mm²
copper 15,7 N / mm²
Smooth steel 17,2 N / mm²
Steel with grease 14,8N / mm²
VA steel 15,9 N / mm²
Peel strength (20 ° C, HDPE) 2,9 N / mm
Temperature resistance (unit: ℃) -50 to 80
Thermal resistance 35 ℃
Thermal expansion coefficient Below TG (<35 ℃) 125 × 10 -6 / K
Above TG (> 35 ℃) 170 × 10 -6 / K
 
Previous
Next

Huizhou Extension Taikang Chemical Co.,Ltd.

 

ADD:New Energy Technology Building, Beibei Section, S357 Province, Chenjiang Town, Huizhou City
Tel:0752-3290186  3103280
E-mail:
hsxw2008@163.com

关注我们

Follow us

Copyright::Huizhou Extension Taikang Chemical Co.,Ltd.      粤ICP备10236919号      Powered by www.300.cn